Click Here to Learn about FREE Shipping   

Anchor bracket with screws $8.8

Anchor and line - 8 lb. traditional and 100’X 5/16 nylon with shackle $98

Bailing scoop - flat sided with handle $11.95

Book - Sixty Years Behind the Mast by Gordon K. Douglass $10

Boom topping lift kit (holds boom up in lieu of boom crutch) $78.8

Bow line - 1/2" x 4' with ss snap hooks spliced at each end $41.85

Bow line - 3/8” twisted nylon with eye spliced at one end $16.25

Compass - Plastimo 101 Contest Tactical with mahogany mount $290

Compass - Ritchie dome style with fiberglass mount $109

Compass - Tacktick Micro digital with mahogany mount $480

Compass mount only - fiberglass for 4” dome type compass $34.15

Compass mount only - mahogany for Plastimo Contest Tactical $44.5

Compass mount only - mahogany for Tacktick Micro $39.9

Compass only - Plastimo 101 Contest Tactical $245

Compass only - Ritchie dome style $75

Compass only - Tacktick Micro digital (no mount) $445

Cover - full mast - North $109

Cover - large tent style cockpit - also covers mainsail - red acrylic $420

Cover - large tent style cockpit (also covers mainsail) - blue or green acrylic $395

Cover - Mainsail cover - blue $175

Cover - Mainsail cover - red or green $205

Cover - North bottom - grey polyester $475

Cover - North trailering - grey polyester to waterline w/Flying Scot graphic $475

Cover - Sailors’ Tailor bottom - soft back canvas $389

Cover - Sailors’ Tailor poly trail/mooring - white, light gray, tan, or light blue $411

Cover - Sailors’ Tailor poly trail/mooring with acrylic skirt to waterline - light gray or tan $535

Cover - Sailors’ Tailor tent style full mooring - acrylic colors $519.2

Cover - Sailors’ Tailor tent style full mooring - poly blue, gray or tan $472

Cover - Sailors’ Tailor tent style full mooring with skirt to waterline - acrylic colors $651.2

Cover - Sailors’ Tailor tent style full mooring with skirt to waterline - poly blue, gray or tan $592

Cover - small cockpit - cotton duck - drains onto seats $258

Cover eye strap - stainless with screws $2.6

Cover hook - large stainless with plastic tube cover $4.6

Cover hook - large stainless with plastic tube cover & shock cord $5.2

Cover hook - small stainless S hook $1.95

Cover hook - small stainless with shock cord $2.5

Cover option - 3/8” shock cord tie-downs installed on T/M or full mooring $73.95

Cover option - 3/8” tie-down lines installed on bottom $38.45

Cover option - Sailors’ Tailor monogramming (up to 8 letters) $11

Cover option - Sailors’ Tailor vent in T/M or full mooring - 2 $16

Hardware to move mainsheet purchase to midboom with instructions for sailing with motor (not class legal) $21.9

Knife - Wichard Rigging Knife With Shackle Key & Bottle Opener - black $29.45

Lifting bridle - stainless 1/4” cable $78

Lifting bridle - web $78

Mainsail flotation - provides 30 lbs. of buoyancy for the top of the mast $195

Master Helper - gin pole type system to help raise the mast $139.95

Master Helper - storage bag (also has a pocket for the tiller) $62

Motor bracket - new style hull bracket with bolts - (3 required) $13.15

Motor bracket complete - stern mount - new style $135

Motor bracket stand off piece only with wood - new style $97.9

Motor bracket wood only for stand off piece (new or old style) $14.6

Paddle - 5.5’silver light $34

Paddle - 5.5’wood $26

Roller furling jib hardware kit - Harken - (requires modified jib) (not class legal) $330.3

Roller furling jib with UV panel $410

Rope halyard conversion kit (not class legal) $177.55

Rudder bag - North - grey $105

Rudder bag - Sailors’ Tailor - padded foam - red or blue $73

Sea Ties - elastic sail stops - 18 inch $9.9

Shroud cover - Davis 6’ vinyl $1.9

Spare parts kit - clevis pins & keepers, drain plug $12.5

Storage hammock hook with screws $1.4

Storage hammock kit $12

Storage hammock only $9.2

Superlube - 1/2 oz. tube (great for lubricating the halyard winch) $4.4

Swim ladder grab rail - low profile stainless steel handrail $46

Swim ladder kit - two step telescoping transom ladder - stainless steel with bolts & instructions $118

The Palm - bungee and ring system to keep mainsheet from tangling with engine $27

Tiller bag - Sailors' Tailor - padded foam - red or blue $50

Tiller cover - blue acrylic - for boats moored with tiller in place $60

Traveler line for mainsheet with instructions for sailing with motor (not class legal) $12

Whistle - safety item - attach to life jacket $4.9

Wind indicator - masthead - Davis Spar Fly $22

Wind indicator - masthead - Davis Spar Fly - replacement vane only $6.4

Wind indicator - masthead - Davis Windex - replacement arrow $17.6

Wind indicator - masthead - Davis Windex Sport $32

Wind indicator - sails - Davis Airflow Tels (attach to sails) - set $6.4

Wind indicator - shroud - Davis Tell Tales - set $9.6

Gloves - Harken black magic - 3/4 finger - S M L XL $29.95

Gloves - Harken Reflex Performance - 3/4 finger - S M L XL $34.95

Gloves - Harken Reflex Performance - full finger - S M L XL $37.95

Hat - embroidered brushed cotton - Khaki $10.5

Hat - embroidered golf cap - 75/25 cotton/poly - red, blue, gray $10.5

Shirt - embroidered 100% cotton denim, long sleeve, button-down collar - blue - S M L XL $35

Shirt - embroidered 60/40 cotton poly blend short sleeve polo - white or dark blue - S M $29

Centerboard cable - 5/32” stainless with loop at one end $15

Centerboard cable eye strap only $6.95

Centerboard cable eye strap with screws $10.1

Centerboard cleat - 360 swivel cleat kit complete $145.6

Centerboard cleat - 360 swivel cleat only with Harken alum. cam cleat and plastic fairlead $105.5

Centerboard cleat - 360 swivel cleat replacement original Racelite sheave $1.55

Centerboard cleat - 360 swivel cleat replacement plastic bushing $1.25

Centerboard cleat - 360 swivel cleat replacement Ronstan sheave kit $5.2

Centerboard cleat - 360 swivel cleat replacement Ronstan sheave only $5

Centerboard cleat - 360 swivel cleat replacement stainless snap ring $1.55

Centerboard cleat - flat plastic clam cleat with screws $10

Centerboard complete $1095

Centerboard line - 1/4” X 40’ $22.4

Centerboard line - short to replace cable (1/4" X 8' white prestretch) $5.6

Centerboard roller bolt and nut only $1.2

Centerboard roller only - each $9.2

Centerboard rollers with bolt and nut $19.6

Centerboard sheave $12.3

Centerboard winch assembly - wheel, shaft, washers - no line or cable $140.3

Centerboard winch cotter pins - large brass - (2 required) $0.7

Centerboard winch drum only $112.5

Centerboard winch shaft only - stainless $20.3

Centerboard winch washers - large 1” stainless - (4 required) $3.05

Rudder blade $233

Rudder blade hold down pins -3/16" plastic - bag of 5 $1.5

Rudder blade lift kit cleat with screws $4.8

Rudder blade lift kit complete $97.9

Rudder blade lift kit replacement lift line with spliced loop $14.2

Rudder blade lift kit replacement shock cord with hog rings $7.5

Rudder blade lift wire w/forked fittings $14.25

Rudder blade tilt bolt with wing nut and washers $2

Rudder cheek plates - pair $23.7

Rudder cheek plates - pair with fasteners $26.9

Rudder complete with blade - no tiller - no 330140 pin $568.3

Rudder gudgeon - rudder - stainless with #12 screws (fitting used to connect the rudder to the hull) $21.55

Rudder head only - no fittings $231.65

Rudder head only with fittings - no blade - no tiller - no 330140 pin $335.3

Rudder head strap (traveler strap) with bolt and nut $11.3

Rudder pin - 3/8” stainless rod with lanyard $24.2

Tiller complete with wood extension $115.15

Tiller extension - JCD 20mm blue spiral-ribbed carbon - 42" fixed with bolts $188

Tiller extension - replacement universal kit - RWO Omniflex with core $28.5

Tiller extension - replacement universal kit for Ronstan $10.2

Tiller extension - Ronstan X-10 - 40” fixed length with bolts $46

Tiller extension - Ronstan X-10 - adjustable (29” to 48”) with bolts $83

Tiller extension - RWO Carbo stick - 42" $96.4

Tiller extension clip for Ronstan adjustable with screws $3.2

Tiller extension clip for Ronstan fixed with screws $3

Tiller extension only - wood $15.75

Tiller only - cosmetic SECOND - no extension $82.8

Tiller only - no extension $97.4

Tiller stainless steel keeper pin on lanyard $1.5

16mm Airblock - forkhead $15.51

16mm Airblock - single $10.92

16mm Airblock - single swivel $19.63

Big bullet - single $21.12

Big bullet - upright lead $29.24

Big bullet -single with swivel $27.45

Bullet - cheek $14.19

Bullet - double with becket $33.95

Bullet - single $11.68

Bullet - single with swivel $20.57

Bullet - through-deck with plastic cover $16.95

Bullet - triple $44.11

Bullet - triple with becket $47.21

Cammatic cam cleat - eye strap - large $2.16

Cammatic cam cleat - eye strap - low profile $1.57

Cammatic cam cleat - flat riser $6.67

Cammatic cam cleat - large wedge only $1.95

Cammatic cam cleat - plastic fairlead - black $5.22

Cammatic cam cleat - with carbon matrix plastic cams $23.63

Cammatic cam cleat - with metal cams $29.96

Cammatic cam cleat - X-tream angle cam fairlead $14.1

Cammatic cam cleat internal spring only $2.15

Cammatic flat phenolic spacer - 3/16 in $5.95

Carbo 40 mm cheek $22.65

Carbo block - 29 mm cheek $11.47

Carbo block - 29 mm double swivel $32.9

Carbo block - 29 mm double swivel/becket $35.7

Carbo block - 29 mm single fixed $10.71

Carbo block - 29 mm single swivel $18.65

Carbo block - 29 mm triple Carbo-cam $75.6

Carbo block - 29 mm triple Carbo-cam becket $78.55

Carbo block - 29 mm triple swivel $43.2

Carbo block - 40 mm single fixed $19.29

Carbo block - 57 mm fiddle $41.56

Carbo block - 57 mm single with swivel $34.29

Carbo block - 57 mm single with swivel and becket $39.05

Carbo block - ratchamatic - cheek - port or stbd $78.92

Carbo block - ratchamatic - single $76.88

D shackle - small $3.18

Dinghy - through deck $37.91

Dinghy sized plastic becket only - discontinued $1.4

Eye strap - small $1.57

Fiddle with swivel - discontinued $49.7

Furling drum and upper swivel (red) $231.92

Harken ball bearings $0.1

Hexaratchet - cheek - port $69.87

Hexaratchet - cheek - rubber pad only $2

Hexaratchet - cheek - starboard $69.87

Hexaratchet - little cheek - port $64.72

Hexaratchet - little cheek - starboard $64.72

Hexaratchet - little single with swivel - black switch $61.79

Hexaratchet - little single with swivel - white switch $61.79

Hexaratchet - single with swivel $73.18

Micro - cheek $12.41

Micro - double $22.99

Micro - double with becket $24.82

Micro - single $9.13

Micro - single with becket $10.54

Micro - single with shackle $13.17

Micro - single with shackle and becket $14.66

Micro - swivel with 1/8 Ronstan D shackle $20.05

Micro - triple $32.89

Micro - upright lead $12.75

Micro cam cleat - angle riser $5.78

Micro cam cleat - eye strap $1.23

Micro cam cleat - flat riser $3.69

Micro cam cleat - internal spring only $1.4

Micro cam cleat - large wedge only $1.4

Micro cam cleat - micro wire fairlead II $5.39

Micro cam cleat - plastic fairlead - black $4.54

Micro cam cleat with aluminum cams $24.5

Micro cam cleat with carbon matrix plastic cams $21.55

Micro Carbo Cam II cleat with wire fairlead $25.92

Micro size sheaves only $3.48

Plastic washer for large spring $0.9

Stand-up spring - large $0.85

Stand-up spring - small $0.63

Swivel base - mainsheet $113.13

Swivel base U-adapter (connects ratchet block to 144 swivel base) $5.78

Wire block - single - inside boom on 6:1 wire outhaul $27.28

Boom crutch deck plate and floor socket kit (2 positions) $32.8

Boom crutch deck plate only with screws $8.2

Boom crutch floor sockets only with fiberglass patches - 2 $16.35

Bow buoyancy bag web straps only (2) $5.3

Bow plate $123

Centerboard gasket - dacron (recommended for racing) $30.4

Centerboard gasket keel molding - long only - brass (2 required) $35.6

Centerboard gasket keel molding screws - 36 stainless $9.4

Centerboard gasket keel molding- short only - brass (2 required) $3.8

Centerboard gasket keel moldings - brass - full set $78.8

Centerboard trunk cap - fiberglass $116.45

Centerboard trunk cap - mahogany $116.45

Chainplate - welded stainless $20.7

Chainplate cover w/screws $11.9

Cove stripe "FLYING SCOT" decal - 3/4” - white, medium blue, dark blue, medium green, dark green, red, ivory or black $2.5

Cove stripe lower (above waterline) - 3-part 3/4” stripe X 42’ white, medium blue, dark blue, medium green, dark green, red, ivory or black $22.3

Cove stripe upper - 3-part 3/4” stripe X 40’ white, medium blue, dark blue, medium green, dark green, red, ivory or black $21.25

Drain plug - 5/8” rubber with flip lever to tighten $4.6

Drain plug - plastic screw in (Type used by Customflex) $4.6

Drain plug screw in plug and socket assembly - chrome (Customflex) $9.6

Drain plug screw in plug and socket assembly - plastic (Customflex) $6.75

Drain tube - 1/2“ flared copper tube (4 per boat) $6.6

Drain tube hose - vinyl tubing to drain seats (2 per boat) $6.3

Flotation - bow buoyancy bag cover only with mounting web straps $98.15

Flotation - bow buoyancy bag kit - bag, protective cover and hardware (as per new boat installation) $176.6

Flotation - bow buoyancy bag kit - bag, straps and hardware (no protective cover) $78.4

Flotation - bow buoyancy bag only $53.9

Flotation - fiberglass strap kit $51.25

Flotation - Styrofoam logs cut to pattern used after mid 1970’s $133.85

Flotation - web strap tang only - stainless $2.35

Flotation - webbing kit (blocks, straps, fasteners, etc.) $29

Gunwale molding - 6' piece $20.5

Gunwale molding - entire boat with screws $186.4

Jib fairlead block & slide - Harken $56.7

Jib Harken Cammatic cleat with wedge and screws $34.5

Jib ratchet mahogany mounting block - 3” X 5” X 3/4” varnished $11.55

Jib ratchet mahogany mounting block - thick 3” X 5” X 1-1/8” varnished $14.8

Jib slide only - Racelite $24.8

Jib slide only - Schaefer $52.2

Jib track end stop only (no screw) $4.2

Jib track end stop with screw (2 needed per track) $4.7

Jib track only $15.25

Jib track spacer only - phenolic $2.7

Jib track with spacer & screws $20.3

Lift plate with screws $8.9

Mainsheet - Harken swivel base, hexaratchet, screws and instructions $189.5

Mainsheet - Ronstan base, Harken Carbo auto-ratchet, screws and instructions $182.1

Mainsheet - Ronstan mainsheet swivel base only with Ronstan cleat $101.4

Mainsheet - Ronstan swivel cleat kit with adjustable arm $103.3

Mast hinge pin assembly with screws $43.4

Mast hinge pin replacement 1/4” bolt only $1.95

Mast hinge pin replacement pin only $18.8

Mast step with bolts $22.4

Mooring ring only (no strap) $17

Mooring ring with strap $40.65

Name plate with screws (Douglass or Flying Scot, Inc. boats only) $4.95

Rudder gudgeon (hull side) with #10 bolts (fitting used to connect the rudder to the hull) $21.55

Safety line - 1/2” X 6’ hollow braid polyester - white $9.1

Safety tread roll - 1” - 3M white per foot $0.9

Safety tread roll - 1” X 60' - 3M white $42

Spinnaker fairlead only (bulls eye fairlead with stainless insert) $4.9

Spinnaker fairlead with bolts $6

Stanchion - varnished mahogany $180.75

Stanchion mahogany centerboard line fairlead (prevents centerboard line from chafing vang bridle) $11.3

Stemband - chromed brass with screws $37.5

Storage locker - plastic dish pan mounted under fore & aft decks $10.55

Tiller tender kit - shock cord under aft deck lip $4.8

Toggle plate - with screws $16.9

Transom port - 4”port with screws $12.9

Console cleat - double with screws - 2 control lines (phenolic machined block with cleats mounted to play control from either side of the boat) $289.9

Console cleat - single with screws - 1 control line (phenolic machined block with cleats mounted to play control from either side of the boat) $193.7

Console cleat - triple with screws - 3 control lines (phenolic machined block with cleats mounted to play control from either side of the boat) $386.1

Cunningham kit - 6:1 cleat on forward coaming $86.4

Cunningham kit - 6:1 cleat on mast $52.4

Cunningham kit - 6:1 led through deck cleated aft $110.1

Hand line - 3/8” line only with knots $6.3

Hand line - eye strap only with screws $9.3

Hand line kit - 3/8” line with eye strap $15.6

Harken bullet with eye strap, spring and bolts $14.9

Jib sheet - 2:1 block only - Ronstan Series 30 BB OrbitBlock single $11.05

Jib sheet - 2:1 purchase kit with 1/4”sheets complete (Harken blocks) $68.6

Jib sheet - 2:1 purchase kit with 1/4”sheets complete (Ronstan blocks) $72.7

Jib sheet - 2:1 spliced bridle only with Harken blocks $42.1

Jib sheet - 2:1 spliced bridle only with Ronstan blocks $46.1

Jib sheet block - 57mm Harken carbo block on slide w/long shackle $69.1

Jib sheet block - Harken carbo auto-ratchet block on slide w/long shackle $113.8

Jib sheet block - large Harken ratchet fairlead block on slide $104.8

Jib sheet cleating kit with auto ratchet on seat $271.8

Jib sheet through seat cleat mount L plate only $5.6

Jib sheet through seat cleat plastic ratchet shim $4.5

Jib sheet through seat cleat slot plate only $6.2

Jib sheet through seat cleat system $315.5

Jib sheet through seat ratchet plate only $14.5

Thru-deck bushing with stainless liner and screws $9

Boom vang - 29 mm Carbo Harken 5:1 with cleat, shackles and line - no bridle, bridle block or car, hook or shackle $122

Boom vang - 29 mm Carbo Harken 6:1 with cleat, shackles and line - no bridle, bridle block or car, hook or shackle $133.6

Boom vang - Cascade Harken 12:1 led aft with single console cleat - no car, hook or shackle $278.3

Boom vang - Harken 12:1 led aft with single console cleat - no bridle, bridle block or car, hook or shackle $346.5

Boom vang - Harken 5:1 with cleat, twist shackles and line - no bridle, bridle block or car, hook or shackle $138.7

Boom vang - Harken 6:1 led aft with single console cleat - no bridle, bridle block or car, hook or shackle $331.6

Boom vang - Harken 6:1 with cleat, twist shackles and line - no bridle, bridle block or car, hook or shackle $152.8

Boom vang bridle - 3/8” twisted nylon $4.9

Boom vang fuse ( helps prevent damage to spars from vang tension) $16.3

Boom vang fuse replacement wire only with two loops $8.75

Centerboard line - 1/4” X 40’ $22.4

Cleat - RWO lance (upright cleat with cam and metal roller) - port $24.75

Cleat - RWO lance (upright cleat with cam and metal roller) - starboard $24.75

Cleat - RWO lance cleat mounting pad $1.7

Jib sheet - heavy - 3/8” X 30’ - single braid - white (Regatta) $26.1

Jib sheet - light - 5/16” X 30’ - Trophy braid - white $21.6

Jiffy reef kit - line, hardware and instructions (mainsail modification required) $71.4

Line - Marlow 3 strand super prestretch - 3/16”white $0.58

Line - Marlow 8 plait flag halyard cord - 1/8”white $0.17

Line - Marlow 8 plait super prestretch - 1/4” white $0.7

Line - Marlow 8 plait super prestretch - 1/4” yellow $0.7

Line - Marlow 8 plait super prestretch - 3/16” white $0.58

Line - Marlow 8 plait super prestretch - 3/16” yellow $0.58

Line - Marlow 8 plait super prestretch - 5/32” yellow $0.43

Line - Marlow 8 plait super prestretch - 5/32”white $0.43

Line - Marlow Excel Pro - 1/8" black $0.25

Line - Marlow Excel Pro - 3/16” pink $0.48

Line - Marlow Excel Pro - 3/16” purple $0.48

Line - Marlow Excel Pro - 3/16”blue $0.48

Line - New England regatta braid - 3/8”white $0.87

Line - New England Regatta Lite polypropylene - 3/8” (9mm) teal $0.71

Line - New England Regatta Lite polypropylene - 5/16" (8mm) purple $0.52

Line - New England twisted nylon - 1/2”white $1.15

Line - New England twisted nylon - 3/8”white $0.81

Line - New England twisted nylon - 5/16”white $0.61

Line - polyester - 1/2” hollow braid - white (safety line) $0.94

Line - Samson trophy braid - 1/4”white, black, red, or green $0.56

Line - Samson trophy braid - 3/16”white or black $0.34

Line - Samson trophy braid - 5/16” white $0.72

Line - Samson ultra lite - 1/4 red or green $0.8

Line - Samson ultra lite - 3/16 red or green $0.5

Line - utility polyester - 3/16 white $0.27

Line - utility polyester - 5/16” white $0.39

Line -Yale Conception - 1/4" $1.03

Line -Yale Conception - 3/16" $0.61

Line -Yale Conception - 5/16" $1.18

Line -Yale Light - 5/16” blue $1.14

Main sheet - 3/8” X 60’ - light weight woven polypro $42.6

Main sheet - 5/16” X 50’ - light weight woven polypro $26

Mainsheet - Harken mid-boom conversion kit (Harken swivel with hexaratchet & dinghy block) $236.6

Mainsheet - Harken swivel base, hexaratchet, screws and instructions $189.5

Mainsheet - Ronstan base, Harken Carbo auto-ratchet, screws and instructions $182.1

Mainsheet - Ronstan mid-boom conversion kit (Ronstan swivel with auto-ratchet & carbo blocks) $229.2

Mainsheet carbo becket block - Harken - with Wichard captive pin bow shackle $58.8

Mainsheet carbo fiddle block with Harken shackle $41.56

Mainsheet carbo mid-boom block with Harken shackle $34.29

Mainsheet extender - 5/32” wire with plastic tubing (no shackle) $19

Outhaul line - 1/4” X 15’ white for standard 2:1 rig (Trophy) $8.4

S hook - large - for custom pole lift and boom vangs on booms built after 1998 $5.6

Safety line - 1/2” X 6’ hollow braid polyester - white $9.1

Safety line - 3/8” X 6’ hollow braid polypro $2.9

Shackle - bow - Wichard screw pin captive $19.7

Shackle - D - Ronstan screw pin loose $5.8

Shackle - D - small Ronstan 1/8 screw pin loose $4.9

Shackle - D - Wichard screw pin captive $17.6

Shackle - Long D - Ronstan 3/16 screw pin loose $4.9

Shackle - Long D - Wichard screw pin captive $22.1

Shackle - twist - Ronstan screw pin loose $6.4

Shackle - Wichard halyard - easy lock $22.8

Shackle -bow - Ronstan screw pin loose $6.7

Shockcord - 3/8”white $1.4

Shockcord - Marlow - 1/4”black $0.45

Shockcord - Novatec - 1/4” (6mm)black $0.46

Shockcord - SuperShok - 5/16” (8mm) black $1.4

Shockcord accessory - plastic nylon hook - white 1/4” $2.45

Shockcord accessory - stainless hog rings - sizes $0.4

Snap hook - 4 in. large stainless with eye - no swivel (used for tie-up and moorings) $8.65

Snap hook - large fixed eye stainless (used for tie-up and moorings) $7.35

Snap hook - large swivel stainless (used for tie-up and moorings) $8.95

Snap hook - medium stainless (used on pole lift) $8.35

Snap hook - swivel stainless (used for spinnaker halyard) $7.25

Spinlock PXR Single T-Series Retro Fit Base $49.3

Spring - Ronstan tapered stand up spring $2.85

Stainless ring - 3/8 X 3 for The Palm $9.5

Stainless ring for lifting bridle $5.55

Webbing - polyester - 2” grey - per foot $0.25

Batten long - 5/8” fiberglass X 40” stiff $7.75

Batten set - 5/8” fiberglass - full set - 2 long & 2 short $29.6

Batten short lower - 5/8” fiberglass X 30” stiff $7.4

Batten short upper - 5/8” fiberglass X 30” flexible $6.7

F.S.S.A. measurement certificates (required on each sail) $20

Gus jib - 4.2 oz racing finish - snug rig - vision window included $520

Gus main - 4.2 oz with shelf foot plus vision & small jib leech windows $875

Gus main option- reef points added $90

Gus spinnaker - crosscut $575

Gus spinnaker - crosscut with special color layout $660

Mad jib - daysailing cloth (5.0 oz. Soft finish) (vision window included) - fold bag $375

Mad jib - Loose rig - 3.8 or 4.2 oz. with vision window & roll bag included $440

Mad jib - Snug rig - 3.8 or 4.2 oz. with vision window & roll bag included $440

Mad jib - Tight rig - 3.8 or 4.2 oz. with vision window & roll bag included $440

Mad main - 5.0 soft daysailing cloth - includes fold bag $780

Mad main option - 1 set of draft stripes $25

Mad main option - large jib leech window $60

Mad main option- reef points added $90

Mad main with vision & small jib leech windows, tapered battens & roll bag - 3.9 oz. cloth $950

Mad spinnaker - crosscut - white with one color panel - 3/4 oz nylon - bag included $550

Mad spinnaker - crosscut - white with one color panel - AirX cloth - bag included $675

Mad spinnaker - crosscut with special color layout - 3/4 oz nylon - bag included $650

Mad spinnaker - crosscut with special color layout - AirX cloth - bag included $775

North jib - cut for loose rig (vision window included) $515

North jib - cut for snug rig (vision window included) $515

North jib - cut for tight rig (vision window included) $515

North jib - soft 6 oz cloth daysailing cut with battens and bag $375

North jib option - tell tale window added $40

North main AP flat cut with shelf foot plus vision & small jib leech windows $1095

North main LC-1 full cut with shelf foot plus vision & small jib leech windows $1095

North main option - large jib leech window $100

North main option- reef points added $100

North main soft 6 oz cloth daysailing cut with battens and large fold bag plus reef points $780

North spinnaker - BR1 full radial made with AirX cloth with custom color layout $968

North spinnaker - BR1 full radial standard layout - made with AirX cloth $880

North spinnaker - BR1 full radial star layout made with AirX cloth $880

North spinnaker - crosscut $800

North spinnaker - crosscut with custom color layout $880

North spinnaker option - brummels and ring attached to corners $20

Sail bag - North fold - jib/spinnaker $32

Sail bag - North fold - main $38

Sail bag - North roll - jib $32

Sail bag - North roll - main $50

Sail repair heavy rip stop tape - full roll - white - 15 ft X 2 in $8.55

Sail repair heavy rip stop tape - per foot - white $0.8

Sail spinnaker repair rip stop tape - full roll - white - 25 ft X 2 in $8.35

Sail spinnaker repair rip stop tape - per foot - white $0.7

Boom bail for mid-boom block with rivets $12.8

Boom complete less outhaul fittings $378.6

Boom complete with 3:1 internal wire outhaul $477.7

Boom complete with 6:1 external rope outhaul $448.6

Boom complete with 6:1 internal wire outhaul $517.8

Boom complete with standard outhaul (no line) $425.2

Boom crutch $44.5

Boom crutch fork only with hose $6.75

Boom crutch tube only $31.1

Boom end casting with rivets and tab for attaching turning blocks $30.9

Boom end casting with rivets less tab $30.9

Boom tube only with sail track cutout and rivets $229.95

Boom vang bail with rivets $10

Boom whoopee - (cloth sleeve attached to boom to keep mainsheet up and out of the way) - with screws - white, blue, or black acrylic $19.7

Clevis pin - 1/4” for shrouds/adjuster plates $2.1

Clevis pin - 3/16” for forestay $1.7

Clevis pin - long 1/4” for formed tangs $2.25

Clevis pin keeper - Cotter pin - 1/16” X 1”stainless $0.25

Clevis pin keeper - Safety Pin (must be taped) $0.95

Clevis pin keeper - Split ring - 1/2”stainless - light $0.6

Clevis pin keeper - Split ring - 5/8”stainless - stiff $0.7

Forestay - 1/8” heavy duty with fork fitting swaged at each end $38.5

Forestay - 3/32” with fork fitting swaged at each end $31.3

Forestay adjuster - 3" multiholed flat with clevis and spit ring $7.2

Forestay adjuster only - 3" multiholed flat $5.2

Forestay adjuster - Racelite multi-holed channel with 2 clevis pins $8.95

Forestay adjuster - replacement clevis pin with split ring keeper $1.3

Forestay extension - 3/32” with fork fitting at one end and threaded at the other end $21.85

Forestay extension -1/8” heavy duty with fork fitting at one end and threaded at the other end $32.85

Forestay tang - connects forestay to formed tangs $2.35

Forestay turnbuckle assembly for 1/8 in. extension with safety wire $22.85

Forestay turnbuckle assembly for 3/32 in with safety wire $16.3

Formed tangs - pair $14.85

Gooseneck complete with rivets $94.95

Gooseneck part - casting with tack pin and rivets $38.7

Gooseneck part - clevis pin $2.25

Gooseneck part - cotter pin $0.55

Gooseneck part - slide $28.85

Gooseneck part - spring $1.8

Gooseneck part - swivel pin $24.25

Gooseneck part - tack pin with keeper $4.2

Gooseneck part - toggle $9.55

Gooseneck part - washer $0.45

Gooseneck track with rivets $16.2

Halyard shackle - Wichard - easy lock $22.8

Halyard winch - with rivets $239.2

Halyard winch backlash brake tip $2.4

Halyard winch backlash spring with screw $5

Halyard winch crank - cast aluminum alloy $6.25

Halyard winch crank - stainless steel (experienced users only!) $22.7

Jib halyard - 3/32” wire with nico loop only (no shackle) $24

Jib halyard - 3/32” wire with Wichard shackle $48.6

Jib halyard block $21.1

Jib tack wire- 3/32” with fork fitting at one end and Wichard shackle at the other end $31.5

Jr. clam cleat - aluminum - with screws $13

Main halyard - 1/16” wire with nico loop only (no shackle) $19.2

Main halyard - 1/16” wire with Wichard shackle $46.6

Mast bottom plug with screw $23.75

Mast complete with halyards, tangs and fittings - no stays $1598

Mast less halyards, tangs and fittings - includes msthd, bot plug, gooseneck track, cutouts, tang bolt hole, rivets $1202.1

Mast sleeve kit with rivets - stainless (reinforces butt of mast) $199

Masthead complete with sheaves and glass plug $91.65

Masthead sheave bolt and nut - aluminum $1.2

Masthead sheave only (2 per masthead) $10.45

Masthead sheave w/bolt $11.65

Nico sleeve - 1/16” $0.3

Nico sleeve - 1/4” $3.5

Nico sleeve - 3/32” $0.45

Nico sleeve - 5/32” $1.05

Outhaul - 2:1 kit with instructions $46.6

Outhaul - 3:1 internal wire kit with instructions $99.1

Outhaul - 6:1 external kit with 1/4”line and instructions $70

Outhaul - 6:1 internal wire kit with 1/4”line and instructions $139.2

Outhaul - wire outhaul shackle - Racelite $5.6

Outhaul - wire outhaul sheave assembly with screws $23.7

Outhaul - wire outhaul wire with ball swage and nico sleeve - 3:1 $17.2

Outhaul - wire outhaul wire with ball swage and nico sleeve - 6:1 short $10.25

Outhaul - wire outhaul wire with loop and nico sleeve - 6:1 long $11.8

Outhaul line - 1/4” X 15’ white for standard 2:1 rig (Trophy) $8.4

Pad eye with rivets for spinnaker halyard & spinnaker pole topping lift $15.4

Rivet - drive rivet - 1/4” long round head $0.4

Rivet - drive rivet - 3/16” long round head $0.35

Rivet - drive rivet - 3/16” medium flat head $0.35

Rivet - drive rivet - 3/16” medium round head $0.35

Rivet - drive rivet - 3/16” short round head $0.35

Rivet - pop rivet - 1/8” X 1/2” aluminum $0.25

Rivet - pop rivet - 3/16” X 1/2” aluminum $0.3

Rivet - pop rivet - 3/16” X 1/2” stainless steel $0.75

Shroud - 5/32” with fork fittings swaged at each end $48.8

Shroud & formed tang bolt - 3/8” X 3-1/2” stainless with nut and rubber washers $4

Shroud adjuster plate - short - used to get more mast rake $7.6

Shroud adjuster plate - single flat (new style with 6 holes on 3/8 centers) $8.8

Shroud adjuster plate - single flat (original style with 4 holes on 7/8 centers) $7.9

Shroud adjuster plate - single with hook $8.3

Shroud adjuster plates - set of one hooked and one flat (connects shroud to chainplate) $16.2

Shroud tangs - pair $9.55

Spinnaker eye fixed with rivets $23.1

Spinnaker eye on slide $30

Stainless steel thimble - 1/4” $1.45

Stainless steel thimble - 5/32” $0.7

Brass ring - 1” $1.85

Brummel hook (Ronstan fast eye) $4.55

Guy clips - plastic pair (converts hooked adjuster plate into a captive hook) $6.55

Guy hook - replacement rubber base for Ronstan hook $3.4

Guy hook - Ronstan deck mounted (no through bolt) with screws $16.05

Halyard - 1/4” X 40’ yellow prestretch (Marlow) $28

Halyard brass scrape plate w/screws for centerboard cap edge $3

Halyard led aft - line only - 1/4”X 50’ yellow $35

Halyard system - cleats on forward coaming - Harken micro - 2 with bolts $45.2

Halyard system - led through deck & cleated aft kit (no line & no reel) $81.4

Halyard system - led through deck & cleated aft with take-up reel kit (includes line) $169.4

Halyard take-up reel only with 62’of 5/32” prestretch $55.2

Pole - 1.5” with Forespar end fittings $260

Pole - RWO tapered $240

Pole down haul kit - line to shock cord with stopper knot on foredeck (includes large S hook) $43.3

Pole down haul kit - through deck line to shock cord with stopper knot (includes large S hook) $75.1

Pole down haul kit for older boats (<5000) - through deck line to shock cord with stopper knot (includes large S hook) $94.8

Pole end fitting - 1.25” Ronstan - stainless $42.45

Pole end fitting - 1.5” Forespar - custom made for Flying Scot, Inc. $74.6

Pole end fitting - plastic tapered - RWO $23

Pole end fitting - plastic tapered (Proctor) $19

Pole end fitting - replacement pin kit for 1.25” Ronstan - stainless $12.35

Pole end fitting - replacement spring for 1.5 inch Forespar $2.75

Pole eye strap $2.75

Pole lift 2:1 led through deck and cleated aft kit (includes line, but no snap) $95.8

Pole lift cleat on coaming kit - (no line or snap) $43.5

Pole lift led through deck and cleated aft kit (includes line, but no snap) $83

Pole lift line - standard rig - 3/16” X 20’ white prestretch (Marlow) $11.6

Pole tube only - 1.5” ID - no fittings $81.5

Sheet cleat at chainplate assembly with screws and instructions $39.2

Sheet seat lip grommet with screws (black cast aluminum) $17.9

Sheet system - on-deck ratchet with cleats - complete kit $287.6

Sheet system - padded big bullet block with shackle (can be shackled to standard fairlead on aft deck) $28.9

Sheet system - padded ratchet blocks with shackles (can be shackled to standard fairlead on aft deck) $169.8

Sheet system - through deck with ratchamatics and exit through seat lip - complete kit less resin (some glass work required) $349.6

Spinnaker rig - sheets, pole lift, halyard, brummel hooks, snap hooks, guy clips and Harken blocks for halyard and pole lift. $189

Spinnaker sheet - 1/4” X 40’ - green or red (Trophy) $22.4

Spinnaker sheet - internal - 1/4” X 45’ - green or red (Ultra lite) $30.2

Spinnaker sheet - internal - 3/16” X 45’ - green or red (Ultra lite) $22.5

Turtles - black sun resitant acrylic to store spinnaker on forward seat corners (2) $28.6

Turtles - Mad - delux with storage pouch for cranks, pencil, si's etc. to store spinnaker on forward seat corners (2) $35

Turtles - North - sailcloth & shock cord retainers to store spinnaker on forward seat corners (pair) $24

Bearing buddy set with bra - Model 1980 $26.5

Nose wheel/jack for trailer tongue $58

Round reflector sticker - amber or red $4

Spare tire locking mount $19

Tie-down - mast fork - front - wood - carries mast while trailering $19.9

Tie-down - mast fork - rear - stainless - carries mast while trailering $41.75

Tie-down centerboard wedge - wood $11

Tie-down for mast - polycord - 24”blue $4.5

Tie-down rig - front & rear forks, strap w/carpet, & 2 stretch cords $95.25

Tie-down strap - Flying Scot monogram - 11 ft. $19.1